中文
News

Find all the updates here

Z Series Drone Arm Maintenance Tips
Time: 2024-06-19Reading Volume: 394

After the busy season of agricultural drone operations, it is important to do a comprehensive inspection and maintenance of the drones to keep best performance. Here, we particularly emphasize a commonly overlooked but extremely important part——the arm locking buckle. Proper installation and tightening are key to avoiding potential serious failures.


09


Four steps to ensure your flight safety:

1. Remove and clean the arm clip screws. If they are stripped, worn or bent, please replace them in time.


10


2. First, install the long pin into the hole on the drone arm, then insert the hexagonal stud horizontally and tighten it, as shown in the picture.

(Note: the long pin is in the hole on the arm, and the short pin is in the hole on the handle)


11 12


3. Install the short pin into the hole on the handle and adjust the angle between the locking handle and the hexagonal stud vertically.


13 14


4. Use M4*12 screws with glue to lock the handle.

(Note: 1. The hexagonal stud and the wrench must keep straight 2. The screws must be tightened)


15


Agricultural drones, as a high-tech tool of modern farming, reduce the labor intensity for farmers and significantly increase crop yields with precise and efficient spraying and fertilization. Regular professional maintenance ensures flight safety, making your plant protection tasks easier and safer.


16

share: