During the spreading operation, wet or mixed lumpy granules easily block the valve, and the turntable blades are easily deformed or damaged under high-frequency operation. Against the market feedback, EFT optimized EPS200, upgraded to the stronger metal stirring plate and the turntable with metal sowing blades. Users can quickly upgrade EPS200 by replacing small parts to make it more durable and smoother. The replacement steps are as follows：

Step 1: Upgrade the stir bar

Upgrade stirring bar to stirring plate. The umbrella-shaped metal stirring plate increased the force area and stir with greater power, which makes sowing smooth and non-blocking.

1. Disassemble the spreader from the tank, remove the top screw, take out the stir bar, install the new stirring plate, then tighten the screw, the stirring bar is upgraded successfully.

Step 2: Upgrade the turntable

Upgrade old plastic turntable to new turntable. The new turntable is embedded with metal sowing blades, thickened and reinforced, which is more wear-resistant and not easy to deform, prolonging the service life.

1. Loosen the bottom knob, and take out the old turntable.

2. Place the new turntable and align it with the screw hole positions, tighten the knob, then the turntable is upgraded successfully.

EPS200Pro also deeply optimized steering gear, control module and cables, making the spreader more stable and better performance. The modular design makes all parts can be replaced separately and conveniently.

Follow EFT to get the latest product trends and preferential information.